Installation Method Of High Grade Tub Faucet

Installation Method Of High Grade Tub Faucet

Most families will install a high grade tub faucet in the bathroom to meet people's usual soaking needs. Install bathtub must install matching Bathtub Faucet, so it is convenient to use water when bathing with bathtub. Proper installation of the high grade tub faucet ensures normal water flow. Although the installation method of bathtub faucet is not complicated, but when installing new design tub faucet, need very careful and cautious. Otherwise, it is easy to install errors. The following will explain the installation method of new design tub faucet.

Before installing a deluxe polished tub faucet, check that all the matching parts are complete. Such as hose, rubber washer, shower and decorative cap. After checking the matching parts of the deluxe polished tub faucet, it is necessary to flush the hose with water to prevent the water from becoming too hard and causing unnecessary damage to the hose body. In addition, it is also necessary to check the new design tub faucet parts in the box for impurities, mainly to prevent blockage or wear of the ceramic valve brake during installation.

When taking over, do not connect the hot and cold sink wrong, and distinguish the direction of cold water and hot water. Leave a 10 - to 20-centimeter space between the hot and cold water pipes. This will protect the deluxe polished tub faucet from being damaged. Angle valve to choose with the deluxe polished tub faucet matching angle valve, and the angle valve and cold water hot water pipe fixed up. In the process of future use, once found problems, to immediately replace. When installing dark bathtub faucets, the spool of high grade Tub Faucets is generally buried in the wall. But do not easily remove the plastic protective film of the spool, so as not to destroy the spool. Finally, after the bathtub faucet is installed, debugging can see the normal water, the flow of hot and cold water is right.